3
A D J U S T M E N T O F T H E W H E E L C H A I R
REMOVING THE REAR WHEEL
1. Make sure that the wheel is not stalled.
. Press the button at the centre of the
wheel by your thumb. Put the other
fingers under the spokes and pull lightly
at the wheel along the axis.
3. To attach the wheel back on the
wheelchair, please follow the instructions
in reverse order. The central button has to
be pressed!
2
REPLACING THE CASING OF THE REAR WHEEL
Replacing the casing of the rear wheel with the
possibility of adjusting the angle of the rear
wheels (0 to 4 degrees)
Loosen the sleeve
– use hexagon key no. .
Pull the sleeve out.
Using the rear wheel axle
pull out the original casing.
Insert the casing with the desired
tilting angle. Use a wrench no. 17
for an exact adjustment
of the guiding mark towards
the groove on the tube of the frame.
Pull the sleeve back on
and tighten it with hexagon key no. .
