CLEANING AND MAINTENANCE
Always turn off the power and unplug the power plug from the electric socket when cleaning the product.
Do not use paint thinner, alcohol, benzene, alkaline detergent, or bleach, etc. when cleaning the product. Using such
substances can cause damage, malfunctions, or changes in color, shape, and quality.
• Always turn off the power and unplug the power plug from the electric socket when cleaning
the product.
• Do not handle plug or appliance with wet hands.
CAUTIONS
How to Store
Please follow the following storage instructions when the product will not be used for an extended period of time.
1. Turn the product off and unplug it. Let the product sit for half a day before emptying the water tank.
2. Clean the main body, air entry port and cover, water tank, and circulator fan following the cleaning and maintenance
instructions.
3. Let the main body and the water tank air dry sufficiently and then wrap the product in a plastic bag or storage box to
protect it from dust.
4. Please store in places with low humidity and no direct sunlight.
• After extended periods of storage, please clean and maintain the product before use.
1. Turn the product off, unplug it, and empty the water tank.
2. Pull the handle of the air entry port cover forward
and then remove the cover.
3. Clean the air entry port and cover with a vacuum
hose/nozzle.
•
Do not use a nozzle with a bristle attachment. This may
damage the product.
4. Reinstall the air entry port cover.
•
Insert the tabs on the underside of the cover into the tab
holes on the main body and press the cover back into
place.
Air Entry Port (Once a Month)
1. Pull out the water tank and remove the cap to empty
the water tank (P9).
2. Clean the water tank and cap with water.
•
Please ensure the float arm is in the correct position
•
Make sure the water tank cap is put back on the water
tank after emptying the cleaning water. Reinstall the
water tank into the water tank slot.
When Float Arm is Out of Place
•
Please insert the tabs on both sides of the float arm into
the float arm tab holes.
Water Tank (Once a Month)
Float arm
Tab
Hole
Wring out a cool or warm damp cloth (under 104°F/40°C) and
wipe away dirt.
•
Do not spray with water. Doing so may cause electric
shock, injury, or product failure.
•
When using a cloth made of synthetic fibers to clean the
product, please follow directions and warnings on the
cloth.
Main Body (Once a Month)
11
12
