Using the scanner 11
Step 6: Turning the scanner off
NOTE
:
• Do not remove the memory card or USB flash drive (if
connected) while the indicators are blinking.
• A fully charged battery can sustain up to 150 scans of 4” x 6”
size photos to the memory card. This is a factory test value for
your reference, and actual battery performance may vary.
• This scanner only supports output images in JPEG (.jpg) format,
and the date/time attribute will not be added.
• Although this scanner accepts FAT16 and FAT32 file systems, it
is recommended that you use the FAT16 file system whenever
possible, as it allows the scanner to read/write data faster.
• For more information on how this scanner names and stores the
scanned image files, see
File naming and storage rules
on
page 16.
• If the memory space is nearly full (below 1MB), the
Status
indicator blinks (see
Indicators
on page 7). Delete some files or
move files elsewhere if necessary.
To turn off the scanner after all originals are
scanned, press and hold the
Power
button for
1 second. The
Power
indicator will blink and
then go off.
Now it is OK to remove the memory card or
USB device from the scanner.
NOTE
: Disconnect the scanner from the
computer when it is not in use or when
the battery is not being charged.
Summary of Contents for Anywhere 4
Page 1: ...Scanner User Guide ...
Page 7: ...4 ...