IPU 40420 Issue 2
Page 17 of 26
5.3.
Camera settings
♦
Caption mode
Select “On” to enable the addition of a text caption when saving an image.
Options will then be displayed when saving an image, to be selected by means of
Hotkey 2 and Hotkey 3.
♦
Auto off
Select “5 Mins”, “10 Mins”, “20 Mins” to allow the camera to switch itself off after
a defined period of inactivity in order to save power or select the “Always On”
option. In addition there is a “10 Min (dim)” where the LCD display is dimmed
after 10 minutes of inactivity.
♦
Camera Reset
Select with Hotkey 3 to restore the factory settings.
♦
Sequence Record
Select this to save a set of images of the scene. The images are saved to the
micro SD card and can be saved at intervals of 5 Sec, 10 Sec, 20 Sec, 30 Sec, 1
Min, 2 Min, 5 Min, 10 Min, 20 Min, 30 Min, 1 Hour and on Alarm. The alarm
setting works in conjunction with the high low alarm function. When the
temperature in the scene exceeds the user defined high alarm threshold
temperature an image is saved. Equally when the temperature in the scene goes
below the user defined low alarm threshold temperature an image is saved.
♦
Sequence Capture
If Sequence Record is selected, then this option is switched on and allows the
user to define the number of images to be saved. Choices available are 10, 50,
100, 500 and 1000 images.
