IPU 40060 Issue 9
Page 16 of 27
Figure 11: The Navigation/Action button of aTungstenT3 Palm
With ‘Auto’ adjust OFF; pressing the centre of the Navigation/Action button will cycle
through three options. The selected option is indicated by a flashing red outline
surrounding the box. The three options are:
1.
Manual control of the sensitivity and temperature range bar. This can be used
in snapshot mode, or when ‘Auto’ adjust is OFF.
•
The Sensitivity and temperature range of the displayed image can be
manually adjusted by use of the Navigation/Action button. Pressing
up/down
adjusts the sensitivity and pressing
left
/
right
adjusts the
temperature range.
2.
Selected Temperature Cursor (SP1).
•
The SP1 cursor can be moved around the screen on the thermal image by
using the Navigation/Action button, i.e.
up/down/left/right.
3.
Selected Temperature cursor (SP2).
•
The SP2 cursor can be moved around the screen on the thermal image by
using the Navigation/Action button, i.e.
up/down/left/right.
When the ‘Auto’ adjust is ON, pressing the Nav/Action button will cycle between the
two temperature cursors only, and not the manual control bar.
2.4.3
Recommended Palms for use with the IRI 1011
Table 2, lists some of the Palms IRISYS have tested with the IRI 1011.
This table is the current IRISYS view on Palms, as of March 2005. For an up to date
list of recommended Palms, please see the IRISYS website,
www.irisys.co.uk
.
The URL links provided in Table 2 for cable suppliers are intended as an example. For
more information on synchronization cables it is advisable to contact your local
manufacturer or supplier.
Palm
Synchronizing cable (not supplied)
Comments
Zire 71
Palm Universal HotSync Cable.
EXpansys Code: 103725.
Web site:
http://www.expansys.com/product.asp?code=
M500USBSERY
Works very well.
Tungsten T3
Universal HotSync Cable.
EXpansys Code: 103725.
Web site:
http://www.expansys.com/product.asp?code=
M500USBSERY
Works very well.
Table 2: Palms tested with the IRI 1011, and recommended serial sync cable.
RIGHT
LEFT
DOWN
UP
SELECT
