iRobot DISCOVERY SE, Manual

Before cleaning with Roomba, clear the

floor of loose objects. If 

you

don't 

vacuum over it, don't use Roomba

over it (e.g., rug tassels, power and

blind cords).

Roomba will clean based on the 

cleaning mode you select. Roomba has

three cleaning modes:

Clean mode

- Roomba automatically

calculates the room size and adjusts its

cleaning time appropriately. Roomba

may clean for up to 60 minutes.

Max mode

- Roomba will run until its

battery is nearly depleted, up to 120 minutes and will then return to the Home Base.

Spot mode

- Roomba will spiral approximately 3 feet in diameter and then spiral back to

where it started, intensly cleaning a localized area.

Cleaning with Roomba 

Charging Roomba 

4

5

Place APS battery into Roomba Robotic Floorvac.

Press down on both ends.

Plug the charger directly into Roomba or

place Roomba on the Home Base while

the Base is plugged in. (See page 12)

You can also charge Roomba in your

Charging Wall Mount.

For best battery performance, always

keep Roomba plugged in or on the Home Base

when not in use.

Roomba will run for up to 120 minutes on hard

floors. Run times may vary based on floor surface.

You can use a  Virtual Wall to block off

areas you don't want Roomba to enter.

(See page 10)

Charge for 3 hours.

Power light will turn solid green to indicate a

full charge.

Unplug the charger and press clean or just

press clean if Roomba is on the Home Base.

1

2

3

4

5

6

Cleaning Pattern

You need to charge Roomba 

before cleaning for the first time.