HOW TO USE THE TG-600V
INSERT LEC INTO TG-600V
INSERT GLUE STICK
REFILLING LEC
• Use only high-quality butane gas.
• Refill in a well-ventilated area away from any
ignition source and other people.
1. Remove
Fuel Cartridge Chamber Cap
at bottom of TG-600V. (Fig. 2.1)
2. Insert LEC into chamber with
blue flat
side toward inside of chamber.
3. Replace Chamber Cap. (Fig. 2.2)
1. Place glue stick in rear chamber. (Fig. 3)
2. Push forward until glue stick stops.
3. If using short sticks or for continuous
use, insert 2 sticks, one behind the other.
4. Wait several minutes after inserting for
glue to reach flow temperature.
1. Hold butane canister upside down when filling
(Fig. 1)
2. Firmly press nozzle of butane fuel into the
Filling Valve
of the
LEC
.
3. Stop filling when gas overflows. (Gas overflow
during refilling is normal and does not indicate a leak)
4. Wait for a few minutes before use for gas to stabilize.
Fig.1
Fig.2.1
Fig.2.2
Fig.3
(Liquid Energy Cell)
Butane
4
5
Summary of Contents for TG-600V
Page 1: ...TG 600V GLUE GUN...
