Splitting Operation
21
5. Extend wedge
Move Split Control Lever toward the end plate to move the wedge and split the log.
Important safety instructions:
Operator position
. ALWAYS operate the log splitter from the manufacturer’s
indicated OPERATOR POSITION. (See diagram above.) Other positions are
unsafe because they can increase the risk of injury from crushing, cutting, flying
objects, or burns.
Remove hands
. Remove both hands from log before activating the split control
lever.
Hand activate
. Use only your hand to operate the Split Control Lever. Never
use any other body part, or a rope, cable, or other remote device to actuate the
control.
Second person
. Many accidents occur when there is more than one person
involved in loading and operating the log splitter. Only one person should
operate the controls.
If a second person is assisting in loading logs, the operator
must NEVER actuate the split control lever until the assistant and all bystanders
are at least 10 feet away. NEVER allow an assistant to hold the log in place
while the operator actuates the Split Control Lever.
Split
Log
Split Log
N
SPLIT CONTROL
Summary of Contents for BH2W2016GX
