Assembly Instructions
37
Remove all components from the shipping crate. Using this manual, identify and sort components as necessary.
Closely inspect all log splitter components.
If you have missing or damaged components, please contact Product Support at 1-800-817-1005.
Find a work space that is large enough to maneuver log splitter once completely assembled. Assemble log splitter
on solid and level ground.
Tools needed: Adjustable wrenches and Torque Wrench
1. Detach Valve Plate from
Splitter
Cut zip tie holding the valve plate to the splitter.
2. Install Valve Pate to
Beam Assembly
Move the valve plate to the mounting position on the beam.
Use 3/8 x 1 ¼″ Bolts and 3/8″ Flange Nut to fasten valve plate to the beam
assembly.
Using a Torque Wrench, Tighten
ALL
3 Bolts to 30 lb-ft.
Summary of Contents for BH2W2016GX
