2. SAFETY INSTRUCTIONS
Most accidents occur due to negligence or carelessness. Avoid unnecessary accidents and follow the safety
instructions given below.
TRAINING
1. Read the safety instructions, terms and conditions of use carefully.
Make sure that you have the potential to safely use both the vehicle and
plough.
2. Never allow children to use the vehicle or plough. Never allow adults to
use the vehicle or plough unless they have received appropriate
instruction.
3. The vehicle or plough should not be used when intoxicated or under the
influence of drugs which may affect perception or reactions.
4. Make sure that there are no persons, especially infants, or animals in the
equipment’s operating area.
PROHIBITIONS
●
Never operate the vehicle on slopes greater than 10° with the plough installed.
●
Never use the plough unless all of the parts are correctly installed.
●
Never use the plough before you have carefully read the entire user manual.
●
Never exceed a speed of 10 km/h when transporting the plough.
●
Never exceed a speed of 5km/h when ploughing.
●
Never use the plow in the dark, unless you are using artificial lighting.
●
Never stand or ride on the plough.
COMPULSORY TASKS
●
Follow every instruction given by the ATV’s manufacturer.
●
Always use proper protective equipment (helmet etc.) when using the vehicle.
●
Always inspect the plough mechanism, fasteners, cable, winch rope and adjustments before
operating. Replace all worn or damaged parts before operating.
●
The safe road-steadiness of the vehicle must always be ensured by using the correct accessories for the task
in hand (chains, counterbalances, etc).
●
Make sure that all of the safety stickers are in good condition. Replace damaged stickers as required.
●
Before starting work, check that the plough and winch are working properly.
●
Make sure that bystanders are moved to a safe distance when operating the plough.
●
Be aware of objects that could be hidden under snow.
●
Slow down the speed when working on a slope or on an uneven surface.
●
Keep away from blade and moving parts during operation.
●
Before adjusting blade angle, stop the ATV and operate the handbrake.
●
When ploughing snow or soil into piles, start backing up before raising the blade.
●
Do not ram the blade into piles of soil or snow. Ensure that you slow down before hitting the pile.
●
Always wear thick leather gloves when handling the winch rope.
●
Always remain clear of moving parts and joints. Keep others away when operating or adjusting the plough.
●
Always lower the plough to the down position before leaving the ATV unattended.
5
