7
Copyright 2021 Iron Bow Technologies
Installing Tethered Remote Controller
The optional Vidyo CLINiC tethered controller conects to the system via a USB port and uses a
cable clamping arrangement to ensure that it is not accidently disconnected. A cradle is supplied
to store the controller when not in use which can either be wall mounted using the two
screws/wall plugs provided, or it can be installed on the rear of the CLINiC System.
To install the controller and cradle on the Vidyo CLINiC:
1.
Unpack controller and cradle
assembly from packaging
2.
Align cradle mounting holes with
rear chassis attachment points
(1)
and attach with supplied screws
3.
Remove cable clamp screw
(2)
, feed
remote cable through clamp and re-
attach using existing screw
4.
Identify USB 3 port on side of
chassis
(3)
and connect remote
controller cable
