20
Install the Gate Hinges
•
There is no standard spacing for where the hinges need to be mounted vertically on the gate frame and
post. You generally want to install them a third of the way from the top and bottom of the gate frame so
that they are not too far inward or outward.
•
When determining hinge placement on the gate frame and post, be sure to account for the gap at the
bottom of the gate. There is no standard bottom gap height, but you want to ensure the gate can freely
swing all the way open and shut without contacting the ground.
•
So long as the area around the gate is flat, most installations will match the bottom gate gap with the
bottom gap of the fence panels. If you live in an area that receives heavier snow fall, be sure to account for
snow pack and ice when planning the gap under your gate.
•
Make sure that your chosen hinge mounting location will not interfere or come in contact with any
horizontal rails or decorative features of the gate.
Safetech Self-Closing Hinges
•
If you are utilizing Safetech self-closing hinges, consult the installation instructions included in their
package.
J-Bolt Hinges (5.5” and 7”)
•
Installation of the j-bolt hinges is the same whether you are using the 5.5” for a walk gate or the larger 7”
version for a driveway gate.
•
The flat plate part mounts against the post and the threaded J-portion with the two adjusting nuts will be
mounted through a hole you drill in the gate frame (see Figure 18)
