background image

4

TTD1146OF

SAFETY INFORMATION

IMPORTANT SAFETY INSTRUCTIONS FOR USE OF THE COMPRESSOR

WARNING

!

Death or serious bodily injury could result from improper or unsafe 
use of compressor. To avoid these risks, follow these basic  
safety instructions.

Read all instructions

Never touch moving parts

Never place your hands, fingers or other body parts near the 
compressor’s moving parts.

Never operate without all guards in place

Never operate this compressor without all guards or safety features in place and in proper 

working order. If maintenance or servicing requires the removal of a guard or safety features, be 

sure to replace the guards or safety feature before resuming operation of the compressor.

Always wear eye protection

Always wear safety goggles or equivalent eye protection. Compressed air must never be aimed 

at anyone or any part of the body.

Protect yourself against electric shock

Prevent body contact with grounded surfaces such as pipes, radiators, ranges and refrigeration 

enclosures. Never operate the compressor in damp or wet locations.

Disconnect the compressor

Always disconnect the compressor from the power source and remove the compressed air from 

the air tank before servicing, inspecting, maintaining, cleaning, replacing or checking any parts.

Avoid unintentional starting

Do not carry the compressor while it is connected to its power source or when the air tank is 

filled with compressed air. Be sure the knob of the pressure switch in the “OFF” position before 

connecting the compressor to its power source.

Store compressor properly

When not in use, the compressor should be stored in dry place. Keep out of reach of children. 

Lock-out the storage area.

Keep work area clean

Cluttered areas invite injuries. Clear all work areas of unnecessary tools, debris, furniture etc.

Keep children away

Do not let visitors contact compressor extension cord. All children / visitors should be kept 

safely away from work area. The appliance is not to be used by persons (including children) 

with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, 

unless they have been given supervision or instruction. Children being supervised are not to 

play with the appliance.

Summary of Contents for TTD1146OF

















Reviews: