background image

page 

13

1

5

.

 

ADDITIONAL ACCESSORIES

D

etailed 

information about

 

all additional accessories

 can be found on the 

ironlogic.me website.

-  Metallic lock cover NAM

-

2

Snaps onto the internal part of the lock. Provides attractive appearance and anti-vandal protection.

-    Set of spacers NAK-1 

This set is intended for installation of locks on the metallic lockers. It takes into account the profile design 
features of the metallic lockers.

-  External power 

module

Provides power for locks. Convenient when programming the locks' operational

 

mode. Used to provide 

power to the lock, if the batteries 

are 

completely discharge

d

 and the lock is closed.

-  Bracelets (identifiers)

-  Lock module for lockers

A spare lock module without electronics, for replacement or repairs.

Z-2 USB 

RF-1996 adapter

Used to set up the locks from the portable computer and subsequent bracelets programming.

-  LOCK'S MANAGER software

Used to set up the locks from the portable computer and subsequent bracelets programming.

16. OPERATING CONDITIONS

Ambient temperature: 

+5

+

40°C. 

Humidity: ≤ 98% at 25°C.
When operating under non-recommended conditions, device parameters can deviate from specified values.  

17.  LIMITED WARRANTY. 

This Device is covered by limited warranty for 

24

 months since the

 

purchase date

.

The warranty becomes void, if:
-  this Manual's guidelines are not followed;
-  the device has suffered physical damage;
-  the device has visible traces of exposure to moist and/or aggressive chemicals;
-  the device circuits have visible traces of tampering by unauthorised parties. 
Under this warranty, the Manufacturer shall repair the device or replace any broken parts as required, 
free of charge, in cases where the fault is caused by a Manufacturer's defect. 
 

1

8

PACKAGE

 CONTENTS

-  Lock module: 

........................................

1;

-  Reader module: 

...................................

1; 

-  Battery compartment cover: 

.................

1;

-  

 

 Decorative cover for the reader.............1;

-  Cable with connectors: 

.........................

1;

-  Push bolt

 

unit: 

......................................

1;

-  Fixing set: 

.............................................

1;

-    Plastic washer........................................1;

Z-

39

6

 EHT

www.ironlogic.

me

Summary of Contents for Z-396 EHT

















Reviews: