background image

Warranty Information

27

IRONMAN FITNESS 150t LIMITED WARRANTY

Residential Warranty

Frame: Lifetime

Motor: 10 Years

Parts: 1 Year

Labor: 1 Year

This Limited Warranty applies in the United States and Canada to products manufactured or distributed by Ironman Fitness

(“Ironman”) under the Ironman brand name. The warranty period to the original purchaser is listed above in the table.

Ironman warrants that the Product you have purchased for use from Ironman or from an authorized Ironman reseller is free from

defects in materials or workmanship under normal use during the warranty period. Your sales receipt, showing the date of purchase

of the Product, is your proof of purchase. This warranty only extends to you, the original purchaser. It is not transferable to anyone

who subsequently purchases the Product from you. It excludes expendable parts (wear items). Wear items pertain to components that

might need to be replaced due to normal wear and tear. These items vary per product but will include pedal straps, seats, grips,

chains, bottom bracket assemblies, pads, etc. Please contact an Ironman customer service representative for specifics on wear items.

This Limited Warranty becomes VALID ONLY if the product is purchased through an Ironman Fitness authorized dealer unless oth-

erwise authorized by Ironman Fitness in writing.

During the warranty period Ironman will repair or replace (at Ironman’s option) the product if it becomes defective, malfunctions, or

otherwise fails to conform with this Limited Warranty under normal use. In repairing the Product, Ironman may replace defective

parts, or at the option of Ironman, serviceable used parts that are equivalent to new parts in performance.  All exchanged parts and

Products replaced under this warranty will become the property of Ironman. Ironman reserves the right to change manufacturers of

any part to cover any existing warranty.

This warranty DOES NOT COVER shipping charges, export taxes, custom duties and taxes, or any other charges associated with

transportation of the parts or Product.

To obtain warranty service, you must contact an Ironman authorized retailer, service technician or Ironman Fitness at our phone

number located in this manual. Any parts determined to be defective must be returned to Ironman to obtain warranty service. You

must prepay any shipping charges, export taxes, custom duties and taxes, or any other charges associated with transportation of the

parts or Product. In addition, you are responsible for insuring any parts or Product shipped or returned. You assume the risk of loss

during shipment. You must present Ironman with proof-of-purchase documents (including the date of purchase). Any evidence of

alteration, erasing or forgery of proof-of-purchase documents will be cause to void this Limited Warranty.

This warranty does not extend to any product not purchased from Ironman or from an authorized Ironman reseller. This Limited

Warranty does not extend to any Product that has been damaged or rendered defective; (a) as a result of accident, misuse, or abuse;

(b) by the use of parts not manufactured or sold by Ironman; (c) by modification of the Product or normal wear and tear; (d) opera-

tion on incorrect power supplies; or (e) as a result of service by anyone other than Ironman, or an authorized Ironman warranty serv-

ice provider. Product on which the serial number has been defaced or removed is not eligible for warranty service. Should any

Product submitted for warranty service be found ineligible, an estimate of repair cost will be furnished and the repair will be made if

requested by you upon Ironman’s receipt of payment or acceptable arrangements for payment.

EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, IRONMAN MAKES NO OTHER WARRANTIES, EXPRESSED

OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. IRONMAN EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY

IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS LIMITED WARRAN-

TY. NEITHER IRONMAN NOR ANY OF ITS AFFILIATES SHALL BE RESPONSIBLE FOR INCIDENTAL OR CONSEQUEN-

TIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR

THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS

OR EXCLUSION MAY NOT APPLY TO YOU. This Limited Warranty gives you specific legal rights and you may also have other

rights that may vary from state to state. This is the only expressed warranty applicable to Ironman-branded products. Ironman neither

assumes nor authorizes anyone to assume for it any other express warranty.

PLEASE SEND IN THE ATTACHED WARRANTY CARD WITHIN TEN (10) DAYS OF PURCHASE TO REGISTER YOUR

UNIT WITH IRONMAN FITNESS.

PLEASE MAIL WARRANTY CARD TO:

IRONMAN FITNESS, ATTN: WARRANTY DEPARTMENT, P.O. BOX 551239, DALLAS, TEXAS 75355-1239

REGISTER YOUR PRODUCT ONLINE AT:

WWW.IRONMANFITNESS.COM

Summary of Contents for 150t





























Reviews: