A
SSEMBLY
I
NSTRUCTION
A
SSEMBLY
STAGE
#6
Attach Lower Pivot Covers (Preassembled)
Assembly Hardware Required:
(*H
ARDWARE
P
REINSTALLED
IN
THE
A
SSEMBLY
P
ARTS
)
#37
Self-Threading Screw
Qty. 4
#39
Truss Screw*
Qty. 4
Assembly Description:
Assembly Notes:
The
Roller Arm Pivot Covers
may be preassembled on some models. If the covers are preinstalled, proceed
onto the next assembly step. If they are not installed, follow the assembly instruction listed below. Some of the mounting hardware
may be preinstalled in the mounting areas of the assembly parts. If the needed hardware is not part of the enclosed hardware pack,
check the actual mounting area on the assembly part.
A)
Attach
Roller Arm Pivot Covers
(#21 / 22) & (#23 / 24) to the
Roller Arm Assemblies
using 2-
Truss Screws
(#39) and
2-
Self-Threading Screws
(#37) per side, following the orientation referenced above.
♦
Assembly Stage #6 completed
37
39
39
39
23
21
39
24
37
P
AGE
11
22
