9
Assembly
Figure 12
Step 1:
Attach the left pedal (30) to the left
crank. The left pedal is marked with
an
"L"
. Turn the threads on the pedal
counter-clockwise
to secure it to the
crank.
Step 2:
Attach the right pedal (31) to the right
crank. The right pedal is marked with
an
"R"
. Turn the threads on the pedal
clockwise
to secure it to the crank.
Step 3:
Attach the pedal straps (30A and 31A)
to the appropriate pedal. Each strap is
marked with an "L" or an "R". The side
with 2 holes will go on the clip towards
the inside of the unit.
Figure 13
Step 1:
Attach the front handlebar (10) to the
console tube (2) using hex head screws
(55) and washers (49).
Figure 11
Step 1:
Reattach the carriage tube caps (13 & 14)
using screws (70).