Warning
: It is highly recommend that you have assistance during the assembly of this
IRONMAN strength equipment.
1. Tools
for assembly:
General tools you may need for the assembling this IRONMAN strength equipment:
Metric Allen Key Set
Metric Wrench Set and Adjustable Wrench
Flat Screwdrivers
Phillips Screwdrivers
Rubber Mallet
Silicone Spray Oil
2. Insert the bolts into the frame as illustrated in the drawing of each of the steps.
3. Hand-tighten the bolts, nuts, and screw during assembly. Hand-tightening will allow for easily
aligning the parts during assembly. Tighten all the hardware once the entire unit has been
completely assembled.
4. It is highly recommended that a professional installer assembles the IRONMAN strength
equipment. But, with the proper assistance, the right tools, and strictly following the assembly
steps, and given enough time; the assembly of the unit can be achieved without professional
help.
5. Thoroughly read each step before proceeding to assemble the items of that step.
6. To aid in assembly of the equipment, the hardware (bolts, nuts, washer…etc.) has been
presorted according to their corresponding steps.
Each bag of hardware is labeled with its
corresponding step number.
7. When the equipment is fully assembled check all the functions for correct operation. Consult the
manual if you experience any issues, or for further help please contact our service department.
See page 2.
ASSEMBLY
PREPARATION
5
Summary of Contents for 6871.1-122915
