Page 2
|
| (800) 227-9523
2013 v1.13
Rails with Integrated Grounding
Installation Manual
Tools Required For Assembly
Hex Head Size
Component
5/16”
#10 Hardware and #12 Self-drilling/tapping screws
7/16”
1/4” Hardware (Clamps)
9/16”
3/8” Hardware (L-feet)
Torque Values
Bolt
Size
Required
Torque
Value
#10
32 in-lbs Dry (27 in-lbs Lubricated)
#12
84 in-lbs Dry (73 in-lbs Lubricated)
1/4-20
84 in-lbs Dry (73 in-lbs Lubricated)
1/4-20 (End Clamps)
65 in-lbs Dry (55 in-lbs Lubricated)
3/8-16
236 in-lbs (201 in-lbs Lubricated)
Use the following torque values in this assembly.
Module Clamp Table
Millimeters
Inches
End Clamp
Grounding Mid Clamp
31.0 - 32.5
1.22 - 1.28
29-7000-125
RS-GD-MCL-200
33.3 - 34.8
1.31 - 1.37
29-7000-134
RS-GD-MCL-200
34.8 - 36.8
1.37 - 1.45
29-7000-224
RS-GD-MCL-225
39.0 - 41.0
1.53 - 1.61
29-7000-157
RS-GD-MCL-225
41.1 - 42.7
1.62 - 1.68
29-7000-165
RS-GD-MCL-250
42.7 - 44.2
1.68 - 1.74
29-7000-171
RS-GD-MCL-250
45.0 - 47.0
1.77 - 1.85
29-7000-214
RS-GD-MCL-250
46.7 - 48.3
1.84 - 1.90
29-7000-187
RS-GD-MCL-275
49.0 - 51.1
1.93 - 2.01
29-7000-204
RS-GD-MCL-275
57.4 - 58.9
2.26 - 2.32
29-7000-230
Unsupported
Module Thickness
Part Numbers
Torque wrenches are required to assemble the rails. The sockets will need to support the following size hex heads:
