Solar Mounting Made Simple
R
Light Rail
Installation Manual
Page 4
2013 v1.3
A.
Mount all of the feet to the roof
in the desired locations.
Note:
Determine the maximum
distance between feet according
to engineering specifications.
Assembly
Step 1. Mounting the feet and the first piece of rail.
Step 2. Mounting the next pieces of rail.
B.
On the next piece of rail, slide
3/8-16” bolts into the side facing
t-slot on the rail. Space the bolts
out to match the foot spacing.
B.
On the first piece of rail, slide
3/8-16” bolts into the side facing
t-slot on the rail. Space the bolts
out to match the foot spacing.
D.
Attach this first piece of rail to the
feet mounted on the roof. Mount
the rail to each foot with a flange
nut and hex bolt. Hand tighten
the nuts and check the level of
the rail. Tighten 3/8-16 hardware
to 236 in-lbs.
C.
On this same piece of rail, slide
1/4-20” bolts into the top facing
t-slot on the rail. Space the bolts
out to match the panel spacing.
C.
On this same piece of rail, slide
1/4-20” bolts into the top facing
t-slot on the rail. Space the bolts
out to match the panel spacing.
