Solar Mounting Made Simple
R
Light Rail
Installation Manual
Page 7
2013 v1.3
F.
Place the second PV Module into
position on the rails, sliding it against
the first so the mid clamps are in
contact with the edges of both panels.
Note: For installations that utilize
WEEBs, please refer to Wiley/Burndy
installation manual for “IronRidge
Light and Standard Series Rails” for
proper installation procedures.
G.
Tighten to 120 in-lbs. (dry), 100 in-lbs. (wet).
H.
Repeat the procedure using
mid clamps to secure each
successive module.
I.
Secure the last module at the end
of the rails using the other set of
end clamps. Tighten to 65 in-lbs.
