Ironwood BR23 | User Manual
8
4. Remove the front access cover by removing the four Allen
head screws
5. Remove hardware, accessories, or tool kit that may be shipped
inside the machine. If additional accessories are ordered, they
may be delivered separately.
6. Close and bolt the front access cover.
Remove any parts
that may be stored
inside the machine.
3.3 Inspection
Save all containers and packing materials until you are satisfied
that your machine has arrived in good condition. If you discover the
machine is damaged after you’ve signed for delivery, immediately
call Stiles Customer Service at 616.698.7500.
When you are completely satisfied with the condition of your
equipment, you should inventory its parts.
Open and check the contents of all containers to ensure all tools,
hardware, and accessories are included. The tool kit should contain
the following items:
1. Allen wrench set
2. Open-end wrench set (6-pieces: 8x10/10x12/12x14/14x17/
17x19/22x24)
3. Grease gun
4. 3m ruler with hex screw
5. Cranking handle
6. Paint (3-color set)
7. User manual
3.4 Move Machine to Final Position
Be sure the site is properly prepared. Refer to section 2.0 for details.
Be sure the front access cover is closed and bolted before
transporting.
TOOLS REQUIRED:
• Hand truck or fork lift
Use a hand truck or fork lift to move the machine on its pallet to its
final location. If using a fork lift, insert the forks as close as possible
to the supports. Make sure fork travel is clear of any obstacles or
wiring.
Use a fork lift or hand truck
to move the machine.
