Ironwood DBR50, User Manual

Ironwood DBR50  |  User Manual

8

3.3 Inspection

Save all containers and packing materials until you are satisfied 
that your machine has arrived in good condition. If you discover the 
machine is damaged after you’ve signed for delivery, immediately 
call Stiles Customer Service at 616.698.7500.

When you are completely satisfied with the condition of your 
equipment, you should inventory its parts.

Open and check the contents of all containers to ensure all tools, 
hardware, and accessories are included. The tool kit should contain 
the following items:

1.  Allen wrench set (7 pieces)

2.  Open-end wrench set (6-pieces: 8x10/10x12/12x14/14x17/ 

17x19/22x24)

3.  Grease gun

4.  3m ruler

5.  Cranking handle

6.  Paint (3-color set)

7.  User manual

3.4 Move Machine to Final Position

Be sure the site is properly prepared. Refer to section 2.0 for details

TOOLS REQUIRED:

•  Hand truck or fork lift

Use a hand truck or fork lift to move the machine on its pallet to its 
final location. If using a fork lift, insert the forks as close as possible 
to the supports. Make sure fork travel is clear of any obstacles or 
wiring. 

0

0 0

0 0

0

0 0

0 0

0

0 0

0 0

Use a fork lift or hand truck 
to move the machine.

3.5 Remove Machine from Pallet

 Caution

The DBR50 weighs approximately 1,600 pounds (730kg). For this 
procedure, we recommend using a fork lift. 

TOOLS REQUIRED:

•  Adjustable wrench

When the machine has been placed at its final location, carefully 
remove the machine from the pallet. 

The machine is

bolted to the pallet

for transport.

1.  From inside the cabinet, remove the bolts that secure the 

machine to the pallet at the interior corners. 

2.  Lift the machine from the pallet by pickup with a forklift.

3.  Carefully place the machine into final position.

0

0 0

0 0

0

0 0

0 0

0

0 0

0 0

When using a forklift, insert forks
as close as possible to the machine
supports and ensure you are free
of any obstacles or wiring.

NOTE: The boring heads can be damaged if care is not taken when 
moving machine.