ASSEMBLED
DISASSEMBLED
Using the Minifix System:
Insert the Minifix Cams into the
appropriate holes with the arrow
facing outwards as shown.
Using the #2 Phillips screwdriver,
rotate the Cam Devices a half turn
clockwise until snug.
To disassemble, turn the Cam
Devices counter-clockwise and
remove panels.
ASSEMBLE
DISASSEMBLE
Using the Rafix System:
Insert the Rafix Cams into the
appropriate holes. The flat edge
of the cam should be facing the
edge of the panel.
Slide Rafix Cams of the panel to
be attached onto the
corresponding posts.
Using a #3 Phillips screwdriver,
turn the rotating portion of the
Rafix Cam a 1/2 turn clockwise to
secure.
IMPORTANT!
Do not
exceed 1/2 turn when tightening
cams.
Turn 1/2 turn
counterclockwise to disassemble
and remove panel.
Flat
edges
must be
aligned
