ASSEMBLED
DISASSEMBLED
Using the Minifix System:
Insert the Minifix Cams into the
appropriate holes with the arrow
facing outwards as shown.
Using the #2 Phillips screwdriver,
rotate the Cam Devices a half turn
clockwise until snug.
To disassemble, turn the Cam
Devices counter-clockwise and
remove panels.
When screwing post into hole,
Do
Not
over tighten. Screw post down
until bottom face of post flange just
touches board surface.
Turn the Bottom Panel (D)
onto its side with the front
edge facing up.
Insert Long Machine Screws
(H1) through the Bottom
Panel (D) and attach four
Casters (H3) as shown.
Using a slotted screwdriver
and a 7/16" wrench, secure
in place using the Nylok Nuts
(H2) as shown.
#1
H3
H3
H3
H3
H1
H2
