Insert three Barrel Nuts (H8)
into the back side of Front
Panel (A) and attach the Pull
Handle (H9) to the Front Panel
using three Short Machine
Screws (H10) as shown.
#9
From the hardware included with the Book Drop
Bag*, take four Corner Clips and attach to each
corner of unit using 1” Panhead Screws (H7) in the
predrilled holes.
*Note:
Some of the hardware included with the
Book Drop Bag will not be used in this assembly.
#8
Screw sixteen Button Snap
Studs (H11) (four to each
edge) into the pre-drilled holes
in the upper edge of unit.
#10
CORNER CLIP
