6
7
Pic 7
General specifications
Dimensions iDock Portrait (W/H/D) .................................................220,0 / 310,0 / 66,8 mm
Dimensions backbox (W/H/D) .............................................................214,13 / 305,0 / 65,0 mm
Dimensions recess for backbox (W/H/D) ......................................205,0 / 295,0 / 65,0 mm
Power requirements ...................................................................................Dependent on model
Outputs ...............................................................................................................Composite-Audio / RCA
Weight .................................................................................................................1.700 g
Operating and storage conditions ....................................................0°C – 35°C; 20% – 95% RH no condensation
Touch Sensor ...................................................................................................capacitive proximity sensor
External contact ............................................................................................Yes (deactivated on despatch)
Secure-open function ...............................................................................Yes (can be deactivated via DIP switch for voltage jumps, drops and cut-
offs)
Position installed ...........................................................................................vertical – max. angle of inclination: +/- 25° in all directions
Horizontal table integration possible. max. angle of inclination:
+25°
Specifications
Specifications & connection model with 110V-230V power supply
Power supply .............................................................................................................................110-240V AC, 50-60 Hz / 15 W
The device can be connected up via the electrical wire connector socket in pic.4 or directly using the adaptor. The device must be
connected up in compliance with the respectively valid legal norms.
Switched off with the iPad power completely run down, recharging takes approximately 7 hours.
Specifications & connection model with 12V power supply
Power supply .............................................................................................................................9,2 to 18V DC; 2A
The device is connected to the power supply via the adaptor (pic.6). It is imperative that the adaptor is earthed; otherwise the iDocks
will not work!!! The device must be connected up in compliance with the respectively valid legal norms.
Switched off with the iPad power completely run down, recharging takes approximately 7 hours.
Specifications & connection model with PoE and USB power supply
Power supply PoE ...................................................................................................................48V; 15.4W PoE standard compliant with IEEE 802.3af
Power supply USB ..................................................................................................................5V DC; 15W USB standard compliant with USB 2.0
PoE
The device is connected via a RJ45 socket (pic.5) with a patch cable. Power supply is provided via a typical commercially available PoE
switch or PoE injector.
Switched off with the iPad power completely run down, recharging takes approximately 9 hours.
USB
Connection is made using a Mini USB socket (pic.5) via a USB cable. Popwer is supplied via the Apple 15W adaptor. Only premium
quality USB cables with a maximum length of 1.5m may be used. iDock functionality cannot be guaranteed if longer or inferior quality
cables and leads are used!
Switched off with the iPad power completely run down, recharging takes approximately 10 hours.
Proximity sensor
iRoom‘s iDock Portrait assembly instructions
Function
Labelling
European colour
code according
to IEC
UK colour
code accor-
ding to IEC
UK colour
code
old
US colour code ac-
cording to Nati¬onal
Electrical Code
Canadian colour
code according to
CEC
Earth
PE or earth
symbol
Green/yellow
Green/yellow
Green/yellow
Green or
green/yellow
Green or
green/yellow
Neutral
conductor
N
Blue
Blue
Black
White
White
Live wire
L
Brown
Brown
Red
Black or red
Black or red
Function
Labelling
European colour code UK colour code
old
US colour code ac-
cording to National
Electrical Code
Earth
Pe or earth symbol
Green/yellow
Green/yellow
Green or green/yellow
Negative -
Input -
Black or blue
Black
Black
Po
Input +
Red
Red
Red