10
MANUAL TIME SETTING
If you are out of the reach of the Radio Controlled Transmitter or if the
reception is not reachable, the time can be set manually. As soon as
the transmitter is received again, the clock will automatically
synchronize with received time:
1. In normal time mode, press and hold
TIME
key for 2 seconds
,
"12H"
or
"24H"
digit flashes.
2. Press
UP
or
DOWN
key to set the hour format.
3. Press
TIME
key again to complete the setting in this sequence:
12/24-hr
-->
Hour
-->
Minute
-->
±23 hour offset
-->
DST
AUTO/OFF.
4. Press
TIME
key to save and exit the setting or let it exit automatically
30 seconds later without pressing any key.
ALARM AND SNOOZE SETTING
1. Press
ALARM
key to enter the alarm time mode. Press it again and
the alarm icon will be displayed.
2. Press and hold
ALARM
key for 2 seconds and the hour digits flashes.
3. Press
UP
or
DOWN
key to set the desired value.
4. Repeat the step 2 and step 3 to set the minute.
5. Press
ALARM
key to save and exit the setting.
NOTE:
1. If no key is pressed during the alarm period, the alarm will turn off
automatically. Alarm beeping lasts for 2 minutes.
2. Press
SNOOZE
key to stop the current alarm and enter snooze.
Alarm icon will be flashing continuously. The alarm will sound again