8
marked on the battery compartment.
3. Replace the battery door.
4. Once batteries are placed in the transmitter, it will start transmitting at
12 second intervals within 5 minute to allow the main unit more easily to
search the transmitter. After 5 minute the transmitter will back to normal
transmitting mode with 60 second intervals the LED and antenna icon
will flash during signal transmission.
NOTE:
1. Once the channel is assigned to one transmitter, you can only change it
by removing the batteries or resetting the unit.
2. Avoid placing the transmitter in direct sunlight, rain or snow.
WEATHER STATION
1. Remove the insulation strip in the battery compartment
2. Plug the adaptor into the DC jack.
3. Press
RESET
key to restart the clock and it will synchronize the
channels of transmitter automatically.
NOTE:
1. The building material and the position of the receiver and transmitter
affect the effective range. So try various locations to obtain the best
result.
2. Place the units away from metal objects and electrical appliances to
minimize the interference. Position the receiver and transmitter within
the effective transmission range: 30, in usual circumstances.