4.4.
The function KCAL
The calculation of calories consumed requires the input of your weight in kg.
Setting your weight:
- Press MODE, until you see KCAL on the right of the display.
- Press and hold the SET button for 2 seconds or until a blinking number appears and the indication KG is
indicated on the right side of the display.
Following settings can now be made:
MODE: With this button you can now set your weight in KG (adjustable from 20-150kg). If you hold the
button down the numbers will run through faster.
SET: Finish and accept settings.
If, while in the set mode, no button is pressed during a time frame of 30 seconds the adjustments made will
automatically be saved and the device will return to the kcal mode.
Deleting the shown calories (kcal)
Press and hold the RESET button in this mode for 2 seconds or until the value changes to zero.
All other records (steps, distance) will also be deleted!
5.
Battery replacement
- The lid of the battery compartment is found on the back side of the instrument. Unscrew the screw that
attaches the lid to the battery compartment and remove the lid.
- Replace the old batteries with new ones type CR2032 batteries (3V). Please note the polarity (the positive
pole against the top so that it is visible to you when replacing)!
- Close the battery compartment again and attach the screw.
6.
Pedometer care
- Do not expose the device to extreme temperatures or direct sunlight over longer periods.
- Avoid blows and shocks of any kind to the device.
- For cleaning use a dry soft cloth that you have moistened with water and a mild cleaning agent. Never use
volatile substances such as benzene, thinner, cleansing agents in spray cans etc..
- When your pedometer is not being used store it in a dry area and out of the reach of small children.
- If the device is activated under extreme coldness it may occur that the display becomes illegible. As soon
as the pedometer is returned to a warm environment the device will function normally.
- Please keep the user’s manual and other documents delivered with the device stored carefully so that you
can reference them at a later point if necessary.
7.
Support
This device is a new development of Irox Development Technology. All information was made and checked
by means of a functioning instrument. It may occur that adjustments and improvements of the device will
take place that due to typographical procedures were not able to be listed in this manual. Should you notice
deviations which make it difficult for you to operate and use the instrument you may at any time download
the latest manual onto your PC free of charge at
www.irox.com
.
© Irox Development Technology
