4.
Select a function (MODE)
Repeatedly press the large "MODE" button until you have reached the desired function. You may choose
between following 7 functions:
-
Time mode
-
Walk / Run mode
-
Memory mode
-
User Data mode
-
Pacer mode
-
Alarm mode
-
Stopwatch mode
After the stopwatch (STW) the first function is displayed again (time).
As soon as you have reached the desired function you can make your adjustments with the "ADJUST"
button. Please read the corresponding instructions on how to proceed.
The device automatically returns to the time mode if the selected mode is not operated within a 5 minute
time frame.
4.1
The function TIME (Time Mode)
The PE108N also serves as a watch by displaying the time and date. In the lower line you can display the
following information by repeatedly pressing the
NEXT
button:
Number of steps >> Calories >> Distance >> Speed >> Percentage of set target >> Movement timer.
The step information indicated here can not be reset manually.
Please note that:
- The correct setting of time is important in order to properly use the memory function. At midnight your step
information from that day will automatically be stored and recording will begin again at zero for the new day.
- Some information (distance, kcal, set target) requires the input of your personal data. Please read the
chapter below, “User Data mode“.
- Settings
To set the time, the date and the 12/24 hr. display format, please press and hold the
ADJUST
button for
approximately 2 seconds or until the words "HOLD ADJ" appear.
As soon as the hour display blinks you can forward adjust this with the NEXT button (to fast forward: Keep
NEXT button pressed).
With the MODE button you can move from setting to setting and the procedure always remains the same as
described above.
After the last setting, the selection of time indication either the 12 or 24 display format, setting is complete
and you will be returned to the time display.
Summary of Contents for PE108N
Page 1: ...PE108N User manual...
