EN
62
6.
SOLVING PROBLEMS
ERROR
BLOWER
ACTION
REFE-
RENCE
OVERHEAT
Cause: Dust filter dirty or air outlet or
motor blocked.
To solve the problem, clean the filter
or remove any towels that cover the
blower, blocking the air outlet. For
safety reasons, to restore operation,
it is necessary to turn off and switch
on the blower with the switch at the
back. Then press OK on the remote
control to update the information.*
See
paragraph
4.3
FILTER
CLEANING
Cause: Every 200 working hours, the
blower will automatically remind you
to clean the filter.
Clean the filter, press the START
BUTTON on the blower, holding it
down for 5 seconds. Then press OK
on the remote control to update the
information.*
See
paragraph
4.3
COMMUNICA-
TION
INTERRUPTED
Cause: Loss of communication
between blower and remote control.
Check that the blower is switched on,
reduce the distance between remote
control and blower. Follow the
instructions for connecting the remote
control to the blower.*
See
paragraph
2.4
* If the problem persists or is different from those indicated, contact the local service.
Summary of Contents for FLECHE AIR 1322
