EN
54
1)
press the navigation button (
►
) until the automatic operation symbol
is selected, as in Fig.
17;
Fig. 17
2)
press (OK) to confirm.
In this mode the thermostat will follow the chosen program (pre-set P1, P2 or P3 or customised U1 or U2),
depending on the time and the on/off function, as shown in Fig. 18.
Fig. 18
3.7.1
CHOOSING A PRE-SET PROGRAM
In AUTOMATIC OPERATION mode, to choose the desired operating function (P1, P2 or P3) proceed as
follows:
1)
press the navigation button (
►
) until the program symbol is selected, as in Fig. 19;
Fig. 19
2)
press (OK) to confirm. At this point a program on the top right of the display will start to blink as in Fig.
20;
Fig. 20
3)
press the (
+
) or (
–
) buttons until the desired pre-set program is displayed, P1, P2 or P3.
4)
press (OK) to confirm;
Summary of Contents for FLECHE AIR 1322
