9
10
● Press while “On-Off” Time Setting
<HK1>
“On-Off” Time Setting of “heating zone 2”
starts setting continuously, after completed
setting of “heating zone 1.”
(Repeat the same procedure.)
Setting procedure – On-time of Program (1)
program(1)
program(2)
,
is running.
● The number (On-time) displays flashing.
Using , adjust time at 7:00.
● Press . (Fix On-time setting. (on 1))
Setting procedure – Off-time of Program (1)
,
● The number (Off-time) displays flashing.
Using , adjust time at 9:00.
● Press . (Fix Off-time setting. (oF 1))
Press “Setup”
button.
Adjust the time to
start running.
Press “Setup”
button.
Adjust the time to
stop running.
Press “Setup”
button.
Setting procedure – temperature level of Program (1)
Press “Setup”
button.
Adjust the
temperature level.
,
● Using , adjust the comfortable
● Press . (Fix the temperature level setting (ond 1))
temperature level,
Setting procedure – On-time of Program (2)
● Press while “On-Off” Time Setting is running.
,
● The number (On-time) displays flashing.
Using , adjust time at 18:00.
● Press . (Fix On-time setting. (on 2))
Setting procedure – Off-time of Program (2)
,
● The number (Off-time) displays flashing.
Using , adjust time at 23:00.
● Press . (Fix Off-time setting. (oF 2))
Setting procedure – temperature level of Program (2)
,
● Using , adjust the comfortable
● Press .
temperature level,
(Fix the temperature level setting (ond 2))
<HK2>
Saving programs
● Return to the status of “On-time” of program(1).
● “On-Off” Time Setting would be saved if the user
anything for 10 seconds.
Press “Setup”
button few seconds.
press few seconds or keep it without doing
:For example, set “On-Off” time
―
7:00
〜
9:00 and 18:00
〜
23:00
[ Demonstration ]
