Figure 8
Maintenance:
General:
The
IRUS UNITRAK
was constructed so that it requires only a minimum of maintenance and upkeep. The
duration and efficiency of the machine depends upon conscientiously observing the instructions that
follow. (For the maintenance of the engine, please see the separate instructions for the engine.) All
maintenance and servicing activities are only to be performed with the engine off and the spark plugs
pulled.
After the first 8 hours of operation:
01. Change the engine oil.
02. Change the engine oil filter (only if the engine has an oil filter).
03. Retighten all hydraulic hose connections.
04. Tighten all other screw connections (engine mounting, axis adjustment, wheel motor suspension, etc.).
05. Check the hydraulic oil level.
06. Remove attachment, lubricate the attachment quick coupler with a grease brush, and mount
attachment again.
07. Lubricate the steering rod (3 grease-gun strokes per grease nipple [5 x]).
08. Check the zero position setting for the drive system.
09. Check and adjust coupler play (Fig. 8).
Summary of Contents for unitrak
Page 1: ......
Page 16: ...Figure 7 1 Grease nipple ...