18
R
EMOVAL
OF
P
OWER
S
UPPLY
M
ODULES
FROM
C
HASSIS
C
HAPTER
7
M
ODULES
I
NSTALLATION
7.2. Removal of Power Supply Modules from Chassis
C
ONTEXT
:
This section describes how to remove power modules from the Chassis.
Figure 3:
Removal of Power Supply Modules from Chassis
To remove a PS module, perform the following steps:
1.
[Optional] If the device is installed in a rack, remove it from the rack.
2.
Loosen the screws securing the line module.
3.
Pull the module from its slot in the chassis.
4.
Install a new module or a blank module (to prevent accumulation of dust)
