Step 2: Refer Chapter
3.2.2.2
for the method to set the protective field (protective field and warning field) of
Field 1.
3.2.6 Transfer configuration to scanner
Carry out according to Chapter
3.2.3
and Chapter
3.2.4
.
Reminder:
After the user has completed the configuration, it is recommend that the file be saved as a
.bin.
To save the file click on the
[
File
]
tab
[
Save as
]
then select
project.bin
. The user may change the name
as required.
3.3 Diagnostics example
Diagnosis function is used provide a real-time scan of the prtective area to solve a problem when the obstacle
intruded into the protective can not be located accurately.
Specific operation methods are as follows:
1) Finish configuration preparations according to Chapter
3.1
.
2) Switch to the corresponding setting area through the tree diagram or
[
Diagnostics
]
tab, as shown in
Fig.3.3.1.
Fig.3.3.1 Diagnostics tab
52
Summary of Contents for LSPD
Page 6: ...6 ...
