18
19
EZYiD
®
Retro-fit System - Issue A - August 2019
EZYiD
®
Retro-fit System - Issue A - August 2019
5.6 Reading the EZYiD
®
Retrofittable System
To scan, hold the Reader 2-3mm
away from the tag
Press the central button. The
Reader will search for a readable
tag for 3 seconds
Repeat the process if a tag is not
located. Different LED and sounds
will notify you of the outcome
Hold the antenna closely (2-3mm) over the Tag, Sticker, Cable Tie or
Universal Moulded Tag which needs to be read
Press down on the central button. The Reader will search for a readable
tag for three (3) seconds
If a readable tag is not located, the Reader will reset and will need
to be pressed again in order to read a tag. Different LED and sounds
will notify you of the outcome of the read. (See Section 5.4: Status
Notifications: LED Lights & Sounds).