background image

14

15

EZYiD

®

 Retro-fit System - Issue A - August 2019

EZYiD

®

 Retro-fit System - Issue A - August 2019

Status Notifications: Sounds & LED Lights

Status Notifications When Reading: Sounds & LED Lights

Status Indicator State

Indicates

One (1) sound

Device is on

One (1) flash orange LED

Device is readable & reader can identify & read the tag
Reader is not paired to device
Data is not being sent & stored to device

No Sound

Device is on

Two (2) LED, orange & blue

Device attempting to locate a readable tag & has not yet found such tag
Device will search for readable tag for three (3) seconds before resetting

Three (3) short sounds

Device is on

One (1) flash orange LED 

Tag is readable & reader can identify & read the tag
Reader is paired to device
Information from tag is being sent to & stored onto device

Flashing blue LED

Reader battery is low

One beep with one flash of orange light:

[Successful Read, Unsuccessful Data Transfer]

After a single press of the central button, the device is on, the tag 

is readable and the reader is able to read the tag, but your Reader 

is not paired to a computer, tablet or mobile device.  Therefore, 

data  information  is  not  being  sent/stored  on  any  device.    [See 

section 5.3: Pairing the Reader to your Software]

No beep and both the blue and orange lights are on:

[Unsuccessful Read]

After a single press of the central button, the Reader device is on 

and it is currently trying to search for a readable tag but has not 

yet found a functioning tag to read.  The Reader will attempt to 

find a readable tag for three (3) seconds.  If a readable tag is not 

found, the orange light will go off, the blue will remain on and the 

user will need to attempt again to read a tag. 

Three (3) short beeps with one flash of orange light:

[Successful Read & Successful Data Transfer]

After  a  single  press  of  the  central  button,  the  device  is  on,  the 

tag is readable, the Reader is able to successfully read the tag, 

your Reader is paired to your computer, tablet or mobile device 

and the information from the tag is being sent to and stored onto 

that device. 

Summary of Contents for EZYiD






















Reviews: