SPECIFICATIONS
ECH 12A
ECH 14A
(3
Slots
10 x MMC modules (8HP) and
1 x MMC controller (MICC)
10 x MMC modules (8HP) and
1 x MMC controller (MICC)
OR
Combination of 12HP and 8HP
MMC modules and
1 x MMS-3U module
1 x MMC controller (MICC)
Rated AC mains input
100 - 264 VAC with PFC
100 - 264 VAC with PFC
Fuse
5x20mm 6.3AT
5x20mm 6.3AT / 5x20mm 10AT
(2
AC power connector
IEC 320 C14
DC module supply voltages
+24 V
DC output power
300 W
300 W / 480 W
(2
Connection
CAN, USB
(1
, Ethernet
(1
Interfaces
(1
16 x 20 bit analog OUT
(4
32 x 24bit analog IN
24 digital I/O
Inhibit
Lemo-hub on the rear, connected with INHIBIT-signal from all HV-modules
TTL level, LOW = active
➜
V
OUT
= 0 Volt
see also 9 Connectors and PIN assignments
Operation temperature
0 °C ... 50°C
Storage temperature
-20 °C ... 70 °C
Dimensions (L/W/H)
308 mm / 19“ mm / 3U
308 mm / 19“ / 3U
Weight
4,1 kg
Notes:
1)
Requires the use of MICC controller, not included in ECH delivery
2)
For ECH 14A with 480W power supply
3)
The ECH 14A is configured for the operation with the installed modules. A modification might necessary for the operation of
Please contact our support for this
4)
For ECH 12A and 14A, I
set
is preset to I
nom
of corresponding HV-module, i.e. no current limit other that I
nom
can be set.
Tabelle 2 Technical data ECH12A/ ECH 14A
4 Order options
OPTION
ORDER CODE
Power supply 480W
(1
481
INHIBIT
INH
Notes:
1)
Only ECH 14A
ECH 124 / 128 / 12A / 14A - MMC Crate | Last modified on: 24.01.2020 | www.iseg-hv.com
10/20
