1 General description
ECH crates of 124 / 128 / 12A / 14A are ideally suited for mobile and stationary usage by it´s compact construction. In MMC
system crates analog controlled DC/DC converters of CPS, DPS or EPS series can be digitally controlled by the MICC crate
controller. Thereby versatile HV supply systems can be composed, which are either powerful (EPS), highly precise (DPS) or
providing a cost saving coverage of a wide HV range (CPS).
Up to 10 slots for MMC (and 1 Hybrid MMC / MMS slot
high voltage modules are provided. The versatile combination of different
modules (CPS, DPS, EPS) in the MMC system allows the user to configure the device for his needs.
Each module is connected to the backplane of the crate by a vendor specific connector, which delivers module power supply and
control signals provided by a MICC controller board. Depending on modules features further digital and analog signals are
provided by the connector (safety loop, Inhibit, KILL Enable etc.).
For control and network communcation of the MMC modules the iseg MICC crate controller needs to be plugged into the special
Controller Slot. The MICC connects the analog interfaces of the MMC HV devices in a 3U Euro cassette with digital standard
interfaces. This allows devices with analog I/O to be integrated into digitally controlled systems. The high resolution of the analog
inputs and outputs allows very precise control of the current and voltage of the connected devices.
2 Package contents / Accessories
Hardware
included
optional
ECH 124
Genuine power cable – EU Plug (Z592069)
CANbus terminating resistor Sub-D 9 male (Z510245)
MICC controller
See also
ECH 128
Genuine power cable – EU Plug (Z592069)
CANbus terminating resistor Sub-D 9 male (Z510245)
MICC controller
See also
ECH 12A
Genuine power cable – EU Plug (Z592069)
CANbus terminating resistor Sub-D 9 male (Z510245)
MICC controller
See also
ECH 14A
Genuine power cable – EU Plug (Z592069)
CANbus terminating resistor Sub-D 9 male (Z510245)
MICC controller
See also
1
Only ECH14A with hybrid MMC/MMS-3U slot (no.10)
ECH 124 / 128 / 12A / 14A - MMC Crate | Last modified on: 24.01.2020 | www.iseg-hv.com
8/20
