SXG
10
3.15. Never attempt to do the mowing operation without
the discharge cover in place or with the cover left
open.
3.16. Never attempt to operate without the drive shaft
cover in place.
3.17. Do not attempt to adjust the cutting height while
the engine is running.
3.18. Adjust the cutting height with the gauge wheels in
accordance with the condition of the ground sur-
face at the working site. Mowing on rough ground
with low cutting height may cause the blades to
hit soil or stones, which is very dangerous.
3.19. If you strike an object or if the lawn mower vi-
brates abnormally, stop the lawn mower immedi-
ately, wait for all moving parts to stop, and inspect
the cutting unit(s). Make all repairs before you
resume operation.
3.20. Be sure to keep the grass discharging part clean.
A clogged discharging part may cause the dis-
charge cover to open, resulting in scattering of
grass and stones, which is very dangerous.
3.21. Never allow grass or leaves to accumulate
around heated parts such as the engine and the
muffler, or this may cause a fire.
3.22. Before moving the lawn mower to another place,
be sure to stop the mower blades and lift up the
mower deck. Otherwise, they may hit stones and
scatter them around, which is very dangerous.
3.23. When driving over a levee or a step, stop the
mower blades, lift up the mower deck, and move
the lawn mower straight to the levee and make
it climb over slowly. Avoid climbing over a levee
too high, or the lawn mower may fall sideways
or turn over.
3.24. Stop the cutting unit(s) when you are crossing
gravel areas
3.25. Watch for traffic when you are operating the
lawn mower near a roadway or when crossing
a roadway.
3.26. Never attempt to use the lawn mower to draw
an implement or a trailer. It is not designed to
draw a load.
Summary of Contents for SBC550X
Page 71: ...SXG 70 ...
Page 72: ...XI ELECTRIC WIRING 71 XI ELECTRIC WIRING E TYPE ...
Page 73: ...72 SXG GE TYPE ...
Page 103: ...SBC600XH SBC550XL 102 ...
