4
Traffic safety
▪
If you are impaired in means that can affect your ability to drive, you should not drive the EuroScooter2
▪
You must have sufficient eyesight to be sure of the situation in every possible situation while driving EuroScooter2.
▪
Observe the valid traffic rules.
▪
Make sure that you are noticed by other road users at all times in traffic, you are vulnerable as a user of a EuroScooter2.
▪
Stop and turn off the electrical system when using your mobile phone.
▪
In ordert o drive on a EuroScooter2, you must be trained and at least 16 years old.
Load
▪
The permissible total load must not exceed (350 kg). See information in the table of technical data on page 7. The term
“permitted load” includes transported loads on loading surface plus any weight absorbed by the front basket.
▪
Make sure that the permitted basket weight does not exceed the maximum of 4 kg. No persons may be transported in the
basket!
▪
Please note that a basket filled with luggage can significantly impede driving ability. No luggage may be transported on
the handlebar, which could restrict driving abilities on the EuroScooter2.
▪
Do not transport anyone on the back-load surface of your EuroScooter2.
Damaged or worn parts
The replacement or repair of damaged or worn parts (frame, fork, lights, brakes, drive) must
always be carried out by ISEL specialists. Otherwise the guarantee and warranty claims are invalid and you would be liable for
damages occurred! Always replace safety-relevant parts with new parts!
Check the delivery
Please check the delivery immediately upon receipt. In case of damage or incomplete delivery we ask that you to contact ISEL
immediately.
Adjusting the wheel
Before using the EuroScooter2, set it to the dimensions of the driver. This is of the utmost importance, especially at the
saddle and handlebars. If optimal adjustment is not possible for the driver with the instructions described,
please contact ISEL for a suitable solution. The brakes are set correctly by default and may only be controlled and adjusted by ISEL
qualified personnel in relation to maintenance work.
Seat
Before using the EuroScooter2, set it to the dimensions of the driver. This is of the utmost
importance, especially at the saddle and handlebars. If optimal adjustment is not possible
for the driver with the instructions described, please contact ISEL for a suitable solution.
The brakes are set correctly by default and may only be controlled and adjusted by ISEL
qualified personnel in relation to maintenance work.
Handlebar position
The handlebar position can be changed and adjusted by loosening the handlebars. Please take care whilst aligning, to achieve a
firm clamp on the handlebar lugs. The clamping must be done on the corrugated area.
Service
The EuroScooter2 can be driven with a forward and a reverse gear after the
first complete battery charge. We recommend the initial driving exercises be done first
in slow gear with and without loaded transport crates in the standard
environment in order to collect driving experience. The chosen speed should
be appropriate and allow a timely stop in dangerous situations. Fast cornering
could tilt the EuroScooter2 and cause injury.
Summary of Contents for 440703
Page 1: ...1 OPERATIONS MANUAL ...
