INSTRUCTION BOOK FOR THE
FLASHING LIGHTS AAL213 - AAL233
AIC021F / 01-98
ANTENNA
ANTENNA SOCKET PROVIDED
COVER
BULB
SUPPORT
SPACER
ELECTRONIC BOARD
WITH FLASHING FOR THE AAL233
WITHOUT FLASHING FOR THE AAL213
BASE
The base is arranged for the mounting of an RK23, RK26, AAR425, AAR445 receiver.
N.B. Use the receiver only with the electronic board without flashing. In this case
the flashing is produced by the control unit (e.g. AAP201U).
ATTENTION: All of the operations must be performed with the power supply removed.
For mounting as in fig. 1 proceed as follows:
- Cut the bracket provided to the height indicated.
70 mm
FIXING SCREWS
Bracket mounting
Fig. 1
ISEO Serrature S.p.a.
Phone: 0364/8821
Via S. Girolamo 13
Fax: 0364/86175
25055 Pisogne (BS)
Fax Sales Dept.: 0364/86861
Italy
Made in Italy
I EO
S
Power supply.
Maximum bulb power.
230 Vac +/- 10%
40 W
