C
SF
iseo
.com
BATTERIES MUST BE REINTRODUCED INTO KEY WITHIN 3 MINUTES OTHERWISE INTERNAL CLOCK
SETTING WILL BE LOST. IN THE LATTER CASE, RESTORE CLOCK SETTING BY SYNCHRONISING WITH
PC SOFTWARE.
ATTENTION!
Iseo recommends to lubrificate cylinders at least once a year using “RIVOLTA T.R.S. plus” lubricant
Lubrication should only be carried out as shown above:
• clean teeth of key carefully
• place a drop of lubricant on teeth
• insert key into cylinder a few times
Product compliance
The product is in compliance with EMC Directives (electromagnetic compatibility).
CYLINDER LUBRICATION
KW13221.EX.ING
TEMPERATURE MAX: -20°+50°C
The products marked with EX Logo are certified by ICIM notified institute nr.0425 in accordance with ATEX directives with following
classification: Ex II 2 G EEx ib IIB T4
II
= Group of equipment
II
. Comprises equipment intended for use in places likely to become endangered by explosive atmospheres.
2
= Level of protection: comprises products designed to remain within their operational parameters, stated by the manu
facturer, and based on a high level of protection for their intended use, in areas in which explosive atmospheres caused by mixtures of
air and gases, vapors, mists or air/dust mixtures are likely to occur
G
= Type of explosive atmosphere: gas vapors
EEx
= Explosion protections
ib
= intrinsic safety of the product (EN 60079-11)
IIB
= Group of gas (Ethylene)
T4
= Temperature class 135°C (not to be confused with the declared maximum operating temperature 50°C)
Dispose of batteries in accordance with the applicable regulations in the Country.
