A
tlas Plus DIN PoE
INSTALLATION GUIDE (EN)
ELECTRONIC SUPPORT SERVICE
iseozero1.com
®
i s e o
. c o m
Iseo Serrature s.p.a
Via San Girolamo 13
25055 Pisogne (BS)
ITALIA
Tel. +39 0364 8821
iseo@iseo.com
Non contractual document. Subjecet to change. Cod. 6000520POE000.3 - 30/03/2020
Atlas DIN PoE Installation Guide (EN) - © 2020 Iseo Serrature S.p.a. - www.iseo.com
Cod.5E052016
1. TECHNICAL FEATURES
Communication interfaces:
- 1 Ethernet interface TCP/IP 10/100 base T
- 1 LOCKBUS channel (CH0) to connect Stylos
online readers and Actuators (max 8+8 for Atlas
DIN and max 4 readers only for Atlas DIN PoE)
- 2 RS485 channels (CH1/CH2) to connect F9000
online readers (max 1 per channel)
- 1 USB 2.0 Type A
- 1 serial interface (debug)
Power supply:
- 12
÷
24 Vdc or PoE
- Maximum power consumption 10W (with no
connected devices)
PoE power supply :
- Requires PoE Switch IEEE 802.3af up to 15,4W
- Atlas DIN PoE absorbed power = 12W
- Delivery of data and power over CAT5e/CAT6
Ethernet cable
Internal Backup battery:
- 1500mAh (7,2Vdc) NiMH battery pack
- Estimated backup time: 30 minutes
CPU and memory:
- ARM 9 based CPU module
- 800MHz CPU clock
- 512MB Flash memory
- 64MB SDRAM
- 8GB Micro-SD
Onboard Relays (max 30V - 5A):
- Relay 1 = normally open (NO)
- Relay 2 = normally open (NO)
Operative system:
- Linux
Push buttons:
- Reset (to manually reboot the Atlas)
- Wake-up (to manually start the Atlas when OFF)
- Switch off (to manually switch off the Atlas)
Housing:
- DIN35 rail installation housing (white color)
- L x W x H = 160 x 90 x 60 mm (9 modules)
Environmental characteristics:
- Operating temperature: -10°C ÷ +50°C
- Storage temperature: -20°C ÷ +70°C
Conformity certifications:
- 2014/53/EU RED
- RoHS (electrical and electronic equipment).
- References standards: EN301 489-1, EN301
489-17, EN330 440, EN60950-1, EN62209-2.
- For details see Declarations of Conformity
available at
iseo.com
website (download area).
Package contents:
-
1 Atlas Plus DIN Server for RFID and F9000 ON-LINE
and OFF-LINE devices, with connectors.
- Installation guide.
WARNING: POWER SUPPLY NOT INCLUDED
(Cod.5E3005)
IT
EN
DE
Pericolo d’esplosione se la batteria è sostituita con altra di tipo errato. Smaltire le batterie esaurite in base alle leggi e alle norme ambientali locali.
Risk of explosion if the battery is replaced with an incorrect type. Dispose of used battery according to your local environmental laws and rules.
Es besteht Explosionsgefahr, wenn die Batterie mit einem falschen Typersetzt wird. Entsorgen Sie verbrauchte Batterien umgehend und im Einklang mit den
örtlichen Umweltgesetzen und Richtlinien.
FR
ES
NL
Risque d'explosion si la batterie est remplacée par un type incorrect. Eliminez les batteries usagées conformément aux règles et lois environnementales locales
en vigueur.
Riesgo de explosión si la batería es remplazada por una incorrecta. Deseche la batería usada de acuerdo con las leyes y normas ambientales en vigor.
Er bestaat een risico van explosie op het moment dat de batterij wordt vervangen voor een incoorect type. Voer gebruikte batterijen af volgens de plaatselijke
milieuwetten en -regels.
ATTENZIONE - ATTENTION - ATENCIÓN - AUFMERKSAMKEIT - AANDACHT
NiMH 7,2V 1500mA
NiMH battery pack
7,2 V - 1500 mAh
INDEX
INSTALLATION GUIDE (EN)
GUIDA INSTALLATIONE (IT)
INSTALLATIONSANLEITUNG (DE)
GUIDE D’INSTALLATION (FR)
1
5
9
13
GUÍA DE INSTALACIÓN (ES)
17
