ISHIDA BC-4000 Service Manual Download

Page: 3 / 142

BC-4000 Service Manual No. 085-6693-02

IMPORTANT NOTICE

Thank you for purchasing the ISHIDA BC-4000.
This manual explains the procedures to perform installation, operation, service, or maintenance of the
machine.
Those who handle the machine must be aware of the hazards involved. These dangers may not be
obvious, so it is imperative to follow the instructions detailed in this manual when installing, operating,
inspecting, or servicing the machine. Therefore, we recommend that you thoroughly read and
understand this manual before installing, operating, inspecting, or servicing the machine, and keep
this manual in a safe place where you can refer to it whenever necessary.
ISHIDA is not liable for any damage, loss or injury that results from incorrect operation, insufficient
caution, unauthorized modifications to the machine, or failure to follow the instructions contained in
this manual.

In the recent weighing industry, the latent hazards involved with handling the machine have increased
due to new materials, new processing methods, and higher processing speeds, and it is impossible to
predict all of the possible dangers.

Likewise, there are far too many operations that cannot or should not be performed to fully describe all
of them in the manual. Please assume that any handling or operation not specifically described in this
manual should never be performed.

Safety countermeasures should be carefully considered and implemented before performing any
installation, operation, inspection, or maintenance procedure not specifically described in this manual
or indicated on the machine itself.

CHANGE IN SPECIFICATIONS

Machine specifications and accessories may be changed at any time due to improvements or other
reasons. Consult with your ISHIDA representative at any time to confirm the actual specifications of
the purchased machine.

ERRORS AND OMISSIONS

The information in this manual has been carefully checked and is believed to be accurate. However,
please understand that the descriptions in this manual may not agree with the actual machine due to
machine improvements. The information is subject to change without prior notice in the future. ISHIDA
assumes no responsibility for clerical, typographical or proofreading errors, or omissions.

LIMITATIONS OF LIABILITY

ISHIDA assumes no responsibility for special, indirect, or consequential damages, loss of profits or
commercial loss in any way connected with the machine, whether such claim is based on contract,
warranty, negligence, or strict liability.
ISHIDA shall assume responsibility for problems with the machine or the system based on an
individual maintenance contract. However, ISHIDA shall not be responsible for secondary problems.
ISHIDA assumes no responsibility for the user's programming of this machine, or any consequence
thereof.
In no event shall ISHIDA be responsible for warranty, repair, or other claims regarding the machine
unless ISHIDA’s analysis confirms that the machines were properly handled, stored, installed, and
maintained and not subject to contamination, abuse, misuse, or inappropriate modification or repair.