23/54
IWQ Series Service Manual
3.3.2 C1 Mode
⋅⋅
Country No. Scale No. and Span Adjustment
[Data at initialization]
4. Country No.: 10 (Japan)
5. Scale No.:
20
[Setup sample]
Country No. : 3 (ASIA): Please refer page 31/54 [3.4 Country No. List] for other country No.,
and 32/54 [3.5 Scale No. List] for Scale No.
Scale No.
: 0 (Switching function available among 150kg/multiple range/counting)
Operation
Display
1. C1 Mode setup
Press 1 key and confirm it by pressing TARE key.
Country No. Input data
2. Setup of Country No.
• For changing the set, input Country number. and fix it
by pressing the TARE key. (3: ASIA)
• For the case not changing the set, do not input but
press the TARE key, and proceed to the next setup.
Country number
3. Setup of Scale No.
• When changing the set, press TARE key, input Scale
No. and fix it by pressing TARE key. (0: Switching
among 150kg/multiple range/counting)
• When not changing the set, do not input but press
TARE key, and proceed to the next setup.
Weighing capacity Scale No.
4. Span adjustment
Press the TARE key to enter into Span Adjustment
Mode.
• Press the UNDER key to return to Test Mode initial
display.
Weighing capacity
A/D converting A/D converting
value
value at previous
zero adjustment
5. Zero adjustment
Press the ZERO key.
Set the A/D converter count value to 20000 for the zero
point adjustment.
∗
Press PCS key to switch between lb/kg specifications.
(For USA only)
Weighing capacity
A/D converter count value
