Manual No. 0149A
IWXOperation Manual Kg Version
7
• Do not disassemble or reconstruct
your scale.
Incorrect disassembly may lead to scale failure.
Reconstructing the scale, disassembling part(s), or
fitting unspecified part(s) may cause serious acci-
dents or personal injuries. If disassembled or recon-
structed the scale may not be allowed to be reused as
an approved scale.
• Do not use your scale in abnormal
conditions.
If smoke, disgusting smell, or any other abnormality
is detected from the scale, immediately disconnect
the power supply cable plug from the outlet and con-
tact the nearest ISHIDA regional representative for
repair. Continued use of the scale under such abnor-
mal conditions may cause a fire or electric shock.
For your personal safety, never repair the scale by
yourself.
• Your scale is a precision machine. Do
not give the scale any shock.
The scale may be impaired or its weighing perfor-
mance may be deteriorated.
• Do not insert/remove the plug in/from
the outlet with wet or dirty fingers.
An electric shock or short-circuit may occur.
• Do not remake the electrical plug or
power cable.
A fire or electric shock may occur.
• Do not pull strongly, break, or remake
the power cable.
The core wires may be cut and cause a fire, electric
shock, or defective functioning of the scale.
• Be sure to insert the load cell into the
display pole.
• Do not pour an excessive amount of
water or high pressure water on the
scale.
• Do not leave any items on the weigh-
ing platter.
• Before using the scale, be sure to
level the scale body.
Otherwise, the scale may malfunction.
• Never use thinner or other volatile
agent for servicing the scale.
Discoloration may result. Wipe the scale body gen-
tly with a soft dry cloth, or use a neutral detergent.
• When carrying the scale, be sure to
hold it at the bottom.
Do not move the scale by holding only the display
unit or display pole.
• Never peel off the seal affixed to the
scale body.
1. Before Using Your Scale
1-1 Cautions for Handling
