Ishida SR-2000a Touch Screen Scale and Printer
Quick Setup Instructions
I. Check and Update Firmware
The SR-2000a uses Compact Flash (CF) memory cards to store both the firmware and images.
All dealers doing any work with the SR-2000a are going to need at least a CF card adapter.
The adapter accepts the CF card and is then inserted into a PCMCIA slot on a notebook
computer. The computer sees the device as another storage drive on the PC allowing the
transfer of files. Rice Lake has two part numbers for these options:
p/n 91871 PCMCIA CF card Adapter
p/n 91870 16MB CF memory card from Ishida
1. Unpack the SR-2000a and place on flat surface or worktable.
2. With the unit in OFF position remove left side white access panel.
3. Remove CF memory card / PCMCIA inner bronze cover by removing two Phillips screws.
4. Remove the CF memory card (p/n 91870) from the slot under the circuit board
(push the Eject Button to the left of CF memory card).
See Figure 1.
5. Insert CF memory card (p/n 91870) into CF card Adapter (p/n 91871).
See Figure 2.
6. Insert Adapter with CF memory card into PCMCIA slot of a notebook computer.
Note
: any CF card adaptor may also be used such as an external USB device or CF card
slot on a desktop computer.
7. Copy Latest Firmware onto CF memory card.
(Extract / Unzip firmware files directly onto CF memory card)
Notes
: 1. If keyboard or label images are not used then select "Yes to All", if prompted, to
overwrite existing files.
2. If images are used, do not replace any files named "IMAGExxx.BMP" and
"IMGSVxxx.BMP" -- label and key images respectively.
8. Remove Adapter with CF memory card from computer.
9. Separate CF card from the Adapter and reinstall CF card into SR-2000a Scale.
Note
: the CF card is installed with the Ishida logo facing down.
10. Replace the inner bronze cover and the outer white access panel.
11. Power Scale ON.
12. Press
MENU
button (Supervisor).
13. Enter
Test
Menu
:
495344
Æ
TEST MODE
.
14. Select
PROGRAM No.
15. Confirm
Main Firmware Version
is updated.
Rev 1, September 2006
2 / 21
SR-2000a
Quick
Setup
